RAEDIAN NEO Single Phase EV Smart Charger

Original price was: $1,199.00.Current price is: $1,099.00. inc GST Free delivery

(4 customer reviews)
  • 7kW solar-smart wall charger for single-phase homes
  • Dynamic load balancing
  • Wi-Fi and Bluetooth app control
  • OLED display and RFID security
  • 3-year warranty, RCM certified
Guaranteed Safe Checkout
  • Premium Quality
  • Secure Payments
  • Australia Owned and Local Support
  • Free Shipping
View spec sheetPDF
3 year warrantyThis product is covered by a 3 year limited warranty.Warranty terms

RAEDIAN NEO 7kW solar smart EV charger

A home charger that runs on your solar. The NEO is a compact smart wall charger for Australian single-phase homes. It charges your EV at up to 7.4kW, uses your spare solar first, and keeps an eye on your home's power so it never trips the main switch.

It comes with a tethered 5m Type 2 cable, two CT clamps for solar charging and load balancing, and two RFID tags. A licensed electrician installs it, and in Adelaide we can refer you to an EV-experienced electrician.

Choose Metallic Silver or Space Grey. Same charger, same 5m cable.

Up to 7.4kW

The most a single-phase home supply can deliver, so most cars get their full home charging speed.

Solar charging built in

Solar Only mode charges purely from spare solar. Solar plus grid tops up faster when you need the car sooner.

Load balancing

Turns charging down when the house is busy and back up when it isn't, so the main switch never trips.

5m cable, 3 year warranty

Tethered 5m Type 2 cable in the box, and a 3 year warranty handled by our Adelaide team.

Solar charging

Drive on sunshine

Clip-on CT sensors measure what your solar panels are making and what your home is using. The NEO then charges your car with the spare power you would otherwise sell back to the grid for very little.

  • Solar Only mode charges purely from spare solar
  • Solar plus grid tops up faster when you need the car sooner
  • Works with any solar inverter brand, because it measures power at the switchboard

Load balancing

Never trips your main switch

A CT clamp on your main supply lets the NEO see your whole home's power use. When the oven, air conditioner and dryer all run at once, it turns charging down, then back up when they finish. You get the fastest charge your supply can safely give, and it can help you avoid an expensive supply upgrade. Watch: Home Balance explained

RAEDIAN app

Your charger, in your pocket

Check on your car from the couch or the office. The free RAEDIAN app shows what the NEO is doing right now and lets you change how it charges with one tap. Watch: the RAEDIAN app explained

  • Solar Only or Home Balance, switched in a tap
  • Schedule charging for cheaper off-peak rates
  • Live power, energy added and a history you can export
  • Lock the charger with RFID tags or the app
  • Free software updates over Wi-Fi

Installation

Built for a quick, tidy install

The two-part housing goes up in two steps: the backplate mounts first, then the charger clips on. Supply cable can come in from the top, bottom or back, so it suits most garages and carports. In Adelaide? We can refer you to an EV-experienced electrician. Ask for an electrician referral

  • Installed by a licensed electrician, who gives you a Certificate of Compliance
  • Type A RCD upstream. The NEO adds its own 6mA DC fault protection
  • Circuit and cabling sized for 7.4kW charging
  • Wall or pedestal mounting, indoors or outdoors (IP55, IK10, -30 to 55°C)
RAEDIAN NEO EV smart wall charger cable connection detail

Finishes

Metallic Silver or Space Grey

Same charger, same 5m cable. Pick the one that suits your wall, then choose it in the colour option above. New EVs in Australia all charge with a Type 2 plug, and so does the NEO. Check your car's charging speed

RAEDIAN NEO Three Phase EV Smart Charger

NEO 7kW specifications

Power

Maximum output
7.4kW (single-phase, 32A)
Supply
Single-phase, or one phase of a three-phase home
Load balancing
Yes, CT clamp on the main supply

Cable and connector

Connector
Type 2
Cable
Tethered, 5m
Compatibility
Every EV sold new in Australia

Solar and smart

Solar modes
Solar Only, solar plus grid
Inverter
Any brand (measures at the switchboard)
App
RAEDIAN app, Bluetooth and Wi-Fi
Access
RFID tags or app lock
Updates
Over Wi-Fi

Protection and install

DC fault protection
6mA built in (Type A RCD upstream)
Housing
IP55, IK10
Operating temperature
-30 to 55°C
Mounting
Wall or pedestal, indoors or outdoors
Install
Licensed electrician, Certificate of Compliance

In the box

Charger
RAEDIAN NEO 7kW with tethered 5m Type 2 cable
Sensors
2 CT clamps
Access
2 RFID tags
Manual
Instruction manual
Warranty
3 years, plus Australian Consumer Law

NEO 7kW reviews

Rating snapshot

  • 5 3 reviews with 5 stars
  • 4 1 review with 4 stars
  • 3 0 reviews with 3 stars
  • 2 0 reviews with 2 stars
  • 1 0 reviews with 1 stars

Average customer rating

4.8★★★★★

From 4 reviews

Own one?

Tell other EV drivers how it went.

1–4 of 4 reviews

  1. ★★★★★

    Daniel K. ·

    Solid wall charger and the app is easy enough to use. Took me a bit to get the solar CT clamp set up but it works well now. Would have liked a slightly longer tethered option.

  2. ★★★★★

    Priya S. ·

    Great charger and even better service. Jason talked me through single vs three phase before I bought. Tidy unit on the wall and the load balancing means it doesn't trip the house.

  3. ★★★★★

    Mark T. ·

    Had the NEO installed by a local sparky last month and it's been faultless. Love that I can set it to only charge from our solar through the app. Charges the Model 3 overnight no worries.

  4. ★★★★★

    Steven Burns ·

    Well designed wallbox with easy configuration per app. Very clean but business like design - works for me

NEO 7kW FAQs

Do I need an electrician to install the NEO?

Yes. A licensed electrician must install it and give you a Certificate of Compliance. It needs a Type A RCD upstream and a circuit sized for 7.4kW. In Adelaide metro we can refer you to an EV-experienced electrician.

Will it charge from solar if I have a different inverter brand?

Yes. The NEO measures power with CT clamps at your switchboard rather than talking to the inverter, so it works with any solar inverter brand.

How fast will the NEO charge my car?

Up to 7.4kW on single-phase power, which is the most a single-phase home supply can deliver. Your car may accept less on AC. Check your model's AC limit.

Can I install it outside?

Yes. The NEO is rated IP55 for water and dust and IK10 for impact, and runs from -30 to 55°C. A covered spot still helps the cable and plug last longer.

What happens if my house is already using a lot of power?

The NEO turns its charging current down so your home stays under its supply limit, then turns it back up when other appliances finish. That is what stops the main switch tripping.

Does it need Wi-Fi?

No. It charges as soon as you plug in, and the app connects over Bluetooth when you are nearby. Wi-Fi adds remote control, charging history from anywhere and software updates.

I have three-phase power. Is the NEO right for me?

The NEO we sell is single-phase, up to 7.4kW, and can be connected to one phase of a three-phase home. If you want faster three-phase charging, contact us and we will talk you through the options.

What does the warranty cover?

The NEO has a 3 year manufacturer's warranty against defects in materials and workmanship. Claims go through our Adelaide team, and you keep your rights under Australian Consumer Law. Warranty terms.

How long does delivery take?

Delivery is free Australia-wide. It's dispatched from Adelaide within 2 business days, and most orders arrive within 2 to 10 business days depending on the courier and your location.

You might also like

Related products

On Sale - Ends Black Friday
0
YOUR CART
  • No products in the cart.